Premseal

Premseal header

Single/ Double-Sided EPDM Foams

Premier side and end-lap sealant is manufactured from EPDM foam, coated on either one or both sides with an aggressive pressure-sensitive acrylic adhesive, available in black as standard.

Single sided EPDM foams

Typical Applications

Applications include:

  • Side and end-lap sealing in steel cladding and fibre cement roofing systems
  • Sealing profiled rooflight sheeting
  • Creating a thermal barrier
  • Cold bridging

Product Features

  • Easy to apply straight from the roll
  • Available in a range of thicknesses
  • Slit to customer required width

 

 SBE 100
Thicknesses (mm)1, 2, 3, 4, 6, 8 (other thicknesses available on request)
Density (ASTM D3575)100 kg/m³
Flame resistanceFMVSS302
AdhesiveAcrylic
Cell structureClosed cell
Compression set (+23°C +/- 2°C)
22h at 25% compression :
Measured after 24h (ASTM D1056)
15%
Water absorption :
Max weight change (ASTM D1056)
< 2%
Tensile strength (ASTM D412)>250 kPa
Elongation – minimum (ASTM D412)>200%
Temperature range (constant)-30°C to +85°C
Temperature range (intermittent)+100°C
Shore Hardness (00 Scale)35 – 40
Environmental protectionCFC and HCFC free

Please note: The above technical information is given as a guide and is based on test data obtained under laboratory conditions. Materials should be fully tested by the end user to establish suitability of the product for the intended application. June 2013

 

Enquiry about this product Data Sheet PDF Health & Safety Sheet