EPDM

Premseal Metalacene Polyolefin Profiled Foam Filler

EPDM

Premier profiled foam fillers are designed to seal roofing and cladding profiles against dust, nesting animals, water and water vapour ingress. Our profiled foam fillers are all made to measure – see below for info on ordering fillers to measure.

Typical Applications

Applications include:

  • Sealing eaves and ridges
  • Sealing hips and valleys
  • Sealing rooflights

Product Features

Premier fillers are supplied:

  • Made to measure
  • With extended base
  • Ventilated
  • In spacer and strip form
  • Angle-cut
  • In a range of materials, thicknesses and colours

Bespoke foam fillers are cut with the latest water jet angle-cutting technology. Diagrams showing the features and terms used in foam fillers can be seen here.

Enquire About Product

    CodeE25E50
    TypeEPDMEPDM
    MaterialFully closed-cell EPDMFully closed-cell EPDM
    ColourBlack or Off WhiteBlack or Off White
    Thickness25mm50mm
    Density (kg/m³)Black 100 - 140
    White 120 - 160
    Black 100 - 140
    White 120 - 160
    Service temp. (°C)Black -40 to +85
    (Intermittent to +100)
    White -30 to +90
    (Intermittent to +110)
    Black -40 to +85
    (Intermittent to +100)
    White -30 to +90
    (Intermittent to +110)
    Durability
    (dependent upon conditions)
    Up to 25 yearsUp to 25 years

    Please note: The above technical information is given as a guide and is based on test data obtained under laboratory conditions. Materials should be fully tested by the end user to establish suitability of the product for the intended application.

     

    Filler Order/Enquiry Form PDFFiller Identification FormGuide to Profiled Foam FillersData Sheet PDFHealth & Safety Sheet

    Book a Technical Discussion

    Sign up to our newsletter

    Privacy Notice

    Privacy Notice

    Sign up to our newsletter